+
  • 486e96a7-b890-4228-8c85-51318fe86ba2.png

XGN15-12(Z) Type Fixed AC Switchgear

The XGN15-12(Z) type fixed AC switchgear (referred to as "switchgear") is designed for use in three-phase AC single-bus, double-bus, or single-bus systems with bypass, operating at rated voltages of 3.6 to 12 kV and 50 Hz, and supporting rated currents ranging from 630 A to 3150 A. It is intended for the acceptance and distribution of electrical energy.

WhatsApp:

Share to

  • Product Description
  • Product Overview

    The XGN15-12(Z) type fixed AC switchgear (referred to as "switchgear") is designed for use in three-phase AC single-bus, double-bus, and single-bus systems with bypass—operating at rated voltages of 3.6 to 12 kV and 50 Hz, with rated currents ranging from 630 A to 3150 A. It is primarily intended for receiving and distributing electrical power, making it suitable for a wide range of applications in power plants, substations, and industrial facilities.

    This product complies with the national standards GB3906 "3~35kV AC Metal-Enclosed Switchgear," IEC298 "AC Metal-Enclosed Switchgear and Control Equipment," as well as standards DUT402 and DLJt404, and meets the "five-protection" interlocking requirements.

    Environmental operating conditions

    Ambient air temperature: -15°C to +40°C.

    Altitude: 2,500 m and below.

    Humidity conditions: The daily average must not exceed 95%, and the daily average water vapor pressure should remain below 2.2 kPa; meanwhile, the monthly average humidity should stay below 90%, with the monthly average water vapor pressure not surpassing 1.8 kPa.

    Seismic intensity: Not exceeding magnitude 8.

    A location free from obvious contaminants such as corrosive or flammable gases.

    Note: For special requirements, please discuss and resolve them directly with our company.

    Main technical specifications

    Serial NumberNameUnitData
    1Rated VoltagekV3.6, 7.2, 12
    2Rated currentA630–3150
    3Rated Short-Circuit Interrupting CurrentkA16, 20, 31.5, 40
    4Rated Short-Circuit Making Current (Peak)kA40, 50, 80, 100
    5Rated Peak Withstand CurrentkA40, 50, 80, 100
    6Rated Short-Time Withstand CurrentkA16, 20, 31.5, 40
    7Rated 
    Insulation Level
    1-minute power frequencyBetween poles, between pole and groundkV24, 32, 42
    Withstand VoltageBetween fracture surfaceskV24, 32, 48
    Lightning StrikeExtreme-to-extreme, squeeze-to-groundkV40, 60, 75
    Withstand VoltageBetween fracture surfaceskV46, 70, 85
    8Rated short-circuit durationS4
    9Protection Level IP2X
    10Main Wiring Configuration Single-bus sectionalized and single-bus with bypass
    11Operating mechanism method Electromagnetic, spring energy storage
    12External dimensions (width × depth × height)mm1100×1200×2650 (Standard Model)
    13Weightkg1000

    Ordering Instructions (Please specify when placing your order)

    1. Main circuit scheme number, purpose, single-line system diagram, arrangement drawing, and distribution room layout plan, etc.

    2. Schematic diagram of the auxiliary circuit wiring and terminal arrangement diagram.

    3. Model, specifications, and quantity of electrical components within the switchgear.

    4. Requirements for control, measurement, and protection functions of switching equipment, as well as requirements for other interlocking and automatic devices.

    5. If bus bridges are required to connect switchgear units or incoming feeder cabinets, please provide specific data such as the rated current-carrying capacity of the bus bridge, its span length, and the height from the ground.

    6. When attachments or spare parts are needed, please specify the type and quantity required.

    7. If switchgear is to be used under special environmental conditions, detailed specifications should be provided at the time of order.

Contact us

Service Hotline

WhatsApp

Product Inquiry

We will contact you within one working day. Please pay attention to your email.

SUBMIT

Related Products

The mobile energy storage charger is a product designed for the new energy vehicle industry.
View details View More
The 7kW AC EV Charger is a lower-power electric vehicle charging device, primarily designed for use in large, medium, and small-scale EV charging stations, as well as various public spaces with electric vehicle parking facilities. It offers two installation options: wall-mounted and pole-mounted.
View details View More
This is a compact, wall-mounted DC charger with a sleek, minimalist design—free of unnecessary elements and incredibly easy to operate, making it perfect for users of all types. It comes standard with a wall-mounting bracket for convenient cable management. Available in two power options: 20kW and 30kW.
View details View More
This charger features a sleek, column-style design that takes up minimal space, making it ideal for low-power charging scenarios where both space and power distribution are limited.
View details View More
< 1234 >

Product Inquiry


Please provide your phone number and email address—we’ll use this information to contact you promptly and resolve your issue as quickly as possible.